Tooth wear and bruxism: A scoping review.

OBJECTIVE: This study presents a scoping review to determine the association between tooth wear and bruxism. DATA: A protocol was developed a priori (Open Science Framework (DOI 10.17605/OSF.IO/CS7JX)). Established scoping review methods were used for screening, data extraction, and synthesis. Risk of bias was assessed using JBI tools. Direct associations between tooth wear and bruxism were assessed. SOURCES: Embase, SCOPUS, Web of Science, Cochrane, and PubMed were searched. STUDY SELECTION: Any clinical study containing tooth wear and bruxism assessment done on humans in any language was included. Animal, in-vitro studies and case reports were excluded. CONCLUSIONS: Thirty publications reporting on the association between tooth wear and bruxism were included. The majority of publications were cross-sectional studies (90%) while only three were longitudinal (10%). Eleven papers assessed definitive bruxism for analysis (instrumental tools), one paper assessed probable bruxism (clinical inspection with self-report) and eighteen assessed possible bruxism (self-report). Of the eleven papers assessing definitive bruxism, eight also reported outcomes of non-instrumental tools. Tooth wear was mostly scored using indexes. Most studies reported no or weak associations between tooth wear and bruxism, except for the studies done on cervical tooth wear. When bruxism assessment was done through self-report, more often an association was found. Studies using multivariate analyses did not find an association between tooth wear and bruxism, except the cervical wear studies. Evidence shows inconclusive results as to whether bruxism and tooth wear are related or not. Therefore, well-designed longitudinal trials are needed to address this gap in the literature. CLINICAL SIGNIFICANCE: Based on the evidence, dental clinicians should not infer bruxism activity solely on the presence of tooth wear.

5.5-year-survival of CAD/CAM resin-based composite restorations in severe tooth wear patients.

OBJECTIVES: Aim of this prospective study was to assess full mouth rehabilitation of severe tooth wear patients using minimally invasive CAD/CAM resin-based composite (RBC) restorations and direct veneers by evaluating restoration survival up to 5.5-years. METHODS: Twenty-two patients with generalized severe tooth wear with functional and/or esthetic problems were included. Following minimally invasive preparation, CAD/CAM RBC restorations (LAVA Ultimate,3M) were adhesively luted, direct RBC veneers (Filtek Supreme XTE, 3M) were applied in the aesthetic region. Patients were recalled after 1m,1y,3y,5y and seen in between recalls by their general dentists or at the clinical study center if complaints occurred. Failures were categorized as F1 (severe deficiencies requiring replacement/extraction), F2 (localized deficiencies requiring re-cementation/repair) and F3 (small chippings requiring refurbishment/monitoring). Survival of indirect restorations was evaluated using lifetables and Kaplan-Meier-graphs, distinguishing between failure categories and tooth type (front teeth=FT, premolars=PM, molars=M). F1 + F2 and F1 + F2 + F3 failures were analyzed using Cox regression on the variables tooth type/ location, age, gender and VDO increase (p < 0.05). RESULTS: 568 indirect restorations and 200 direct veneers in 21 patients evaluated for up to 5.5-years. For indirect restorations, 96 failures were recorded (F1:6;F2:41;F3:49) and annual failure rates were 0.29%(FT), 1.56%(PM), 2.93%(M) for F1 +F2 and 0.53%(FT), 2.42%(PM), 6.11%(M) for F1 + F2 + F3. Reasons for failure were chipping fracture (48), adhesive fracture (32), complete debonding (7), caries (4), endodontic treatment (1) and reasons unknown (documentation general dentists, 4). Molar tooth type had a statistically significantly increased probability of failure compared with front teeth and premolars for F1 + F2 + F3 (p < 0.006). Direct veneer restorations showed 18 failures (F1:2;F2:9;F3:7). SIGNIFICANCE: Minimally invasive CAD/CAM RBC restorations combined with direct RBC veneers showed an acceptable clinical mid-term survival for restorative rehabilitation of severely worn dentitions.

Single crown vs. composite for glass fiber post-retained restorations: An 8-year randomized clinical trial.

OBJECTIVES: This study aimed to compare the success and survival rates of metal-ceramic crowns and composite resin restorations applied in root filled teeth that received a glass fiber post. METHODS: A prospective, randomized controlled trial, with equivalent parallel groups was designed. Eighty-two teeth were randomly allocated to the metal-ceramic or composite resin groups. Multivariate Cox regression analysis with shared frailty for patients and Kaplan-Meier curves were performed using success and survival rates (p<0.05). RESULTS: Seventy-five post-retained restorations (34 metal-ceramic crowns and 41 composite restorations) in 62 patients were analyzed. The median follow-up was 8.1 years [IQR 4.0-9.9]. Twenty-seven failures were observed. Twenty-two failures (81.5 %) were observed in the composite resin group, of which six (27.3 %) were not repairable. Five failures (18.5 %) were observed in the metal-ceramic crown group, of which three (66.6 %) were non-repairable. The cumulative success rate at 8 years was 85.0 % for crowns (AFR=1.31 %) and 43.2 % for composite resins (AFR=6.58 %), while the survival rate was 93.8 % for crowns (AFR=0.52 %) and 97.6 % for composite resins (AFR=0.20 %). Considering the success rates, adjusted multivariate Cox regression showed that composite resin had a Hazard Ratio of 5.07 (95 %CI, 1.99-12.89) greater than the metal-ceramic crown. No significant difference in the failure risk was observed when the survival rates were considered (HR=0.38, 95 %CI (0.10 - 1.44), p = 0.156). Co-variables did not affect the success and survival rates (p>0.05). CONCLUSIONS: Metal-ceramic crowns showed a higher success rate than composite restorations. The survival rates were similar, but composite restorations presented a higher need for repairs. CLINICAL SIGNIFICANCE: Post-retained composite restorations may need more reinterventions during the lifecycle, although more preservation of sound tooth structure is expected with a large restoration of resin post-and-core. These aspects have to be discussed with the patient for decision-making planning.

Association between salivary characteristics and tooth wear: A systematic review and meta-analysis.

OBJECTIVE: Literature was systematically reviewed to identify salivary characteristics and their association with tooth wear. DATA: A protocol was developed a priori (PROSPERO CRD42022338590). Established systematic review methods were used for screening, data extraction, and synthesis. Risk of bias and the certainty of evidence were assessed using the JBI tools and GRADE, respectively. Direct and indirect association between tooth wear and salivary components and characteristics were assessed. SOURCES: MEDLINE, Embase, SCOPUS, Web of Science, CINAHL, and additional sources were searched. STUDY SELECTION: Studies reporting salivary characteristics in patients with tooth wear or models thereof were included. Animal and in-vitro studies and case reports were excluded. RESULTS: One-hundred eleven studies were included. Qualitative analyses showed a negative association between tooth wear and salivary pH and flow rate in many studies. The higher the study size the higher the chances that an association with pH and flow rate was found. Xerostomia, buffer capacity and salivary consistency/viscosity had also some degree of association with tooth wear in fewer studies. Associations with the 39 salivary components were scarcer. Random effects meta-analyses (7 studies) showed that pH levels in stimulated whole saliva were lower in patient with tooth wear compared to controls (-0.07 [-0.10 to -0.04]). However, there was not enough evidence to establish a quantitative association with flow rate. The general risk of bias was unclear and the certainty of evidence was low or very low. A large diversity of methodologies limited the inclusion of all studies in quantitative synthesis. CONCLUSION: From all potential risk factors, stimulated whole saliva pH showed a negative association, both quantitatively and qualitatively with tooth wear, indicating potential usefulness of pH monitoring in these patients. Moreover, associations between flow rate and tooth wear were observed qualitatively. However, in both cases the risk of bias was mostly unclear, and the certainty of evidence was low. No causal associations could be observed. CLINICAL SIGNIFICANCE: Tooth wear is a prevalent condition that may lead to functional or esthetic impairments and pain. Knowing the potential risk factors like salivary pH or flow rate and their dynamics could be relevant during tooth wear monitoring and to intervene accordingly, especially in conditions like gastroesophageal reflux disease.

Inter- and intra-variability in tooth wear progression at surface-, tooth- and patient-level over a period of three years: A cohort study: Inter- and intra-variation in tooth wear progression.

OBJECTIVE: To explore the variability of tooth wear progression at the surface-, tooth- and patient-level over a period of three years three years using in vivo 3D-measurements of full dentitions amongst patients with moderate to severe tooth wear and without demand for restorative rehabilitation. METHODS: Fifty-five eligible patients with moderate to severe tooth wear had intra-oral scans taken using either the 3 M True Definition Intraoral Scanner or the 3 M Lava Chairside Oral Scanner. The maximum height loss (µm) per cusp/incisal/palatal surface at unrestored surfaces was measured using the 3D Wear Analysis (3DWA)-protocol with Geomagic Qualify, resulting in sixty-four measurements per dentition. Data was visualized using box plots. Correlation was calculated between tooth wear progression rates of different tooth types and surfaces. RESULTS: Thirty patients with scans at intake and after three years were included (38 ± 8 years, 77% M, 23% F). Mean observation time was 3.1 ± 0.2 years. Surface measurements (N = 1,615) showed a high deviation and a high number of outliers at all surfaces, indicating large variability amongst the surfaces, tooth types and patients with tooth wear progression rates. Correlations between regions were very low: anterior-molar region -0.219, anterior-premolar region 0.116 and premolar-molar region 0.113. Correlations between the surfaces of molars were also low (between 0.190 and 0.565). CONCLUSIONS: In a group of patients with moderate to severe tooth wear, large differences in wear progression were found within and amongst patients. Tooth wear progression is therefore highly individualized and can be very localized. CLINICAL SIGNIFICANCE: This study confirms the necessity of individual management of patients with moderate to severe tooth wear. Effective monitoring of tooth wear is important when deciding the timing and need for restorative intervention. CLINICAL TRIAL REGISTRATION NUMBER: NCT04790110.

Long term clinical performance of 'open sandwich' and 'total-etch' Class II composite resin restorations showing proximal deterioration of glass-ionomer cement.

OBJECTIVES: To compare clinical performance of resin composite posterior Class-II restorations placed with etch-and-rinse adhesive or open sandwich technique using glass-ionomer cement. METHODS: Data on Class II restorations placed by one dentist between 1990 and 2016 were collected from patient files, including caries risk, tooth related variables, applied materials and dates of last check-up visit and restoration placement. Open sandwich restorations were placed before 2001, while after 2001, a total-etch technique using etch-and-rinse 3-step adhesive was used when placing a Class II composite restoration. For statistical analysis, Kaplan-Meier statistics and a multilevel Cox-Regression was conducted (p < 0.05). Annual Failures Rates (AFR) were calculated. RESULTS: 675 Class II restorations were placed in 91 patients, 491 total-etch restorations (observation time 2-18 y), and 184 open sandwich restorations (observation time 19-29 y) showing AFRs at 15 years as 2.9 % for total-etch and 9.7 % for open sandwich restorations. Secondary caries as failure was equally distributed among the 2 groups and 27 % of the failures in the open sandwich group were due to proximal deterioration of glass-ionomer cement. The Cox-regression showed a significant higher risk for failure for the open sandwich technique compared to total-etch class-II composite restorations (HR = 2.9; p < 0.001). SIGNIFICANCE: Application of glass-ionomer cement using the open sandwich technique cannot be recommended for class-II restorations as being more complex and showing poorer clinical performance.

Perception of oral health related quality of life and orofacial aesthetics following restorative treatment of tooth wear: A five-year follow-up.

OBJECTIVES: Non-carious tooth wear often has a multifactorial etiology and may lead to functional or aesthetically related problems. The most common complaints associated with tooth wear are dissatisfaction with dental appearance and a negative impact on the experienced Oral Health Related Quality of Life (OHRQoL). The aim of this study was to investigate the change in OHRQoL and the perception of aesthetics, following restorative treatment of moderate to severe tooth wear patients, with a five-year follow-up. METHODS: An explorative study, based on prospective data, was performed. OHRQoL and the perception of aesthetics were measured with the OHIP-NL and OES-NL. These questionnaires were completed before treatment, one month after treatment, and at 1-, 3- and 5-years post-treatment. Treatment involved full mouth reconstruction with composite resin restorations. The data was analysed as repeated measures by using a linear mixed-effects model. RESULTS: One hundred and twenty-three tooth wear patients that received restorative rehabilitation were included (97 males, 26 females, 37.5 ± 8.8 years-old). Data showed a statistically significant increase in both experienced OHRQoL and orofacial appearance after restorative treatment. The OHIP-scores remained stable over time, while the OES-scores slightly decreased during the years after treatment. Regarding the seven domains of the OHIP, the largest difference in OHIP-score was found in the domain of 'Psychological Discomfort'. The mean overall OHIP-score was 1.8 at baseline and 1.3 at the 5-years recall. The mean OES score increased from 41.8 at baseline to 66.1 at the 5-years follow-up. CONCLUSIONS: Tooth wear patients reported significant improvements in their OHRQoL and their perception of orofacial aesthetics after restorative treatment. This increase remained at least five years post-treatment. CLINICAL SIGNIFICANCE: The clinical impact of restorative treatment for tooth wear patients is considerable. This paper emphasizes the need to include a discussion of the patient related outcome measures when planning care.

Survival rate and treatment success of glass fiber posts cemented with two adhesive cementation strategies after up to 106 months: a randomized clinical trial.

OBJECTIVES: The objective of this study is to evaluate the longevity of two fiber post cementation strategies in a prospective, multicenter, non-inferiority, double-blind randomized controlled trial. METHODS: A total of 152 teeth, with adequate endodontic treatment and loss of coronal structure and bilateral simultaneous posterior occlusal contacts, were randomly allocated to receive glass fiber posts cemented with a conventional cementation strategy (CRC group: adhesive system + resin cement) (Adper Single Bond + RelyX ARC; 3 M-ESPE) or a self-adhesive cementation strategy (SRC group: self-adhesive resin cement; RelyX U100/U200; 3 M-ESPE). The patients were recalled annually for clinical and radiographical evaluation with a 93% recall rate (142 teeth, with 74 at CR groups and 68 at SRC group). The primary outcome was survival rate, considering the fiber post debonding (loss of retention). The secondary outcome included the success rate of the prosthetic treatment with crown debonding, post fracture, and tooth loss (not related to post failure). Both outcomes were evaluated annually. The Kaplan-Meier method and Cox regression with 95% confidence interval were used for the statistical analysis. RESULTS: For the primary outcome (failures directly related to fiber posts cementation strategy), there were 4 fiber post debondings (2 per group), 8 root fractures (3 for SRC group and 5 for CRC group), and one mixed failure (debonding combined with root fracture for CRC), with both strategies presenting similar survival rates (p = 0.331), with 88.9% for the CRC group and 90.9% for the SRC group. For the secondary outcome (failures not related to fiber post cementation strategies), there were 8 crown debondings, 3 post fractures, and 3 tooth losses, with no statistically difference between groups (p = 0.701), with 77% for SRC and 82% for CRC. CONCLUSION: Fiber post cementation strategies with conventional or self-adhesive resin cement presents similar tooth survival and success rates. TRIAL REGISTRATION: NCT01461239 CLINICAL RELEVANCE: Both adhesive cementation strategies led to high survival and success rates and are indicated for fiber post cementation, even after a long follow-up period (up to 106 months).

Managing tooth wear with respect to quality of life: an evidence-based decision on when to intervene.

Patients with more severe forms of tooth wear may require restorative rehabilitation. The decision to commence treatment must be taken carefully and there are a multitude of factors to consider. Alongside the clinical signs and symptoms typically associated with tooth wear, there is also the need to assess the impact of the condition on the patient's oral health-related quality of life. As part of the discussions relating to the attainment of informed consent for the restoration of the worn dentition, not only is it relevant to appropriately appraise the risks, benefits, costs, reasonable alternatives and likely prognosis of the proposed treatments, but to also elaborate on the expected impact of the intervention on the patient's oral health-related quality of life. The aim of this article is to review the evidence relating to the impact of the quality of life with the management of tooth wear, with the introduction of the concept of an evidence-based approach to decision-making when planning care.

Posterior Dahl: A Minimally Invasive Method for the Treatment of Localized Posterior Tooth Wear.

PURPOSE: This retrospective case series of 9 patients aimed to describe clinical outcomes and patient satisfaction following the implementation of the posterior Dahl concept to manage localized posterior tooth wear. MATERIALS AND METHODS: Localized occlusal space was created in the posterior dentition. Supra-occluding direct restorations were placed bilaterally for the restoration of molars. Intraoral scans were taken at the pre-treatment stage, immediately post-restoration, and during follow-up appointments. Scans were used to undertake analysis of any occlusal changes and re-establishment of the occlusion. A questionnaire was used to assess patient satisfaction, alleviation of any pre-treatment concerns, and evaluation of post-treatment complaints. RESULTS: Immediately post-treatment, all patients showed an increase in the vertical dimension. Opening of the bite in the untreated areas following restoration of worn posterior molars resulted either in a tendency towards or the actual reestablishment of the occlusion. One patient completely lacked compensatory vertical tooth movement in the untreated areas, culminating in the persistence of a vertical open bite. One restoration displayed cohesive fracture after 4 months. Pre-treatment problems (eg, sensitivity) were fully resolved amongst all patients after 6 months. Post-treatment complaints were minor and demonstrated resolution within a relatively short period of time. Eight patients reported being "very satisfied" with their treatment outcomes. CONCLUSION: Application of the posterior Dahl concept appears to offer a promising, relatively simple, minimally invasive and effective approach for the management of localized posterior tooth wear, which is well accepted by patients.

Perioperative therapies to reduce edema after orthognathic surgery: a systematic review and meta-analysis.

Objective To systematically review the literature and assess the effectiveness of perioperative systemic and nonsystemic therapies in reducing edema after orthognathic surgery. Study Design Four databases (PubMed, Web of Science, Bireme, and Scopus) were searched. Only randomized clinical trials were included and assessed using the RoB 2.0 software (Cochrane Collaboration, London, UK). Studies were grouped into time of assessment and systemic/nonsystemic therapy. Results Eighteen studies were included in this review (8 in the meta-analysis, n = 349). The qualitative assessment of systemic (enzyme therapy, dexamethasone, betamethasone, and Venoplant) and nonsystemic therapies (thermotherapy and K-Taping) appear to reduce edema. Manual lymphatic drainage (MLD) after 72 hours (CI: -1.03 to 2.31; P = .45), and 30 days (CI: -1.53 to 0.49; P = .49), and laser after 24 hours (CI: -1.36 to 1.48; P = .93), 72 hours (CI: -4.81 to 2.92; P = .63), 30 days (CI: -3.44 to 0.99; P = .28), and 90 days (CI: -1.83 to 0.96; P = .54) showed no significance. Thermotherapy reduced edema after 48 hours (CI: -48.47 to -13.31; P = .0006) and 30 days (CI: -14.73 to -1.98; P = .01). Conclusion The Grading of Recommendations, Assessment, Development and Evaluations tool showed moderate evidence for thermotherapy (significant reduction of edema), whereas the MLD and laser results were rated as high certainty of evidence (no reduction of edema).

Longevity of metal-ceramic single crowns cemented onto resin composite prosthetic cores with self-adhesive resin cement: an update of a prospective analysis with up to 106 months of follow-up.

OBJECTIVES: To evaluate the longevity of metal-ceramic single crowns cemented onto resin composite prosthetic cores using a self-adhesive resin cement in a prospective clinical descriptive study. METHODS: A total of 152 teeth were endodontically treated and received resin composite prosthetic cores and metal-ceramic crowns cemented with a self-adhesive resin cement. The patients included in the sample were recalled for clinical and radiography evaluation in an up-to-106-month period after the final cementation procedures, with an average of 62 months of follow-up. 91.5% of the sample (142 teeth) were evaluated regarding the treatment survival rate, analyzed considering the loss of crown retention (crown debonding) and tooth loss as the primary outcome. In addition, post debonding, and root fracture occurrences were also recorded as secondary outcomes to evaluate the success rate of the prosthetic treatment. The aesthetic parameters were also evaluated according to the FDI criteria. The Kaplan-Meier method and Cox regression with 95% confidence interval were applied for the statistical analysis. RESULTS: Regarding the primary outcome, the metal-ceramic crowns cemented with self-adhesive resin cement presented a high survival rate (91.5%), with 8 crown debondings and 3 tooth losses (1 due to caries and 2 due to periodontal disease) occurring after the evaluation period. For secondary outcomes, 9 root fractures and 4 post debondings occurred, generating a success rate of 72%. All crowns had a score 1 on the FDI criteria, indicating that they were clinically excellent or very good regarding the aesthetic parameters. CONCLUSION: The metal-ceramic crowns luted with a self-adhesive resin cement presented a survival rate of 91.5% after an average of 62 months of follow-up. Furthermore, the restorations remained aesthetically satisfactory over time, without changes that would indicate prosthetic retreatment. A success rate of 72% was obtained considering the secondary outcome, mainly related to intraradicular retainer failures (root fractures or post debonding). CLINICAL SIGNIFICANCE: The self-adhesive resin cement is clinically indicated for cementation of metal-ceramic crowns onto resin composite prosthetic cores.

Prevalence of tooth wear and associated factors: A birth cohort study.

OBJECTIVES: To investigate the prevalence of tooth wear and associated factors in adults from the 1982 Pelotas Birth Cohort. METHODS: A subsample of the 5,914 individuals from the 1982 Pelotas Birth Cohort was randomly selected to be interviewed and clinically examined at the age of 31. Tooth wear was evaluated using a simplified version of the Tooth Wear Index (TWI), considering the absence or presence of tooth wear in dentin of first molars and anterior teeth (incisors and canines). Independent variables were socioeconomic, demographic, unhealthy behavior, and mental health. Crude and adjusted Poisson regression models were employed. A significant level of P ≤ 0.05 was adopted. RESULTS: A total of 537 individuals were evaluated. A tooth wear prevalence of 61.6% was observed. Females presented a statistically significant lower tooth wear in dentin prevalence ratio (PR) compared to males in the adjusted analysis (PR 0.76; 95% CI: 0.67-0.86). Acid beverage consumption (PR 1.22; 95% CI: 1.01-1.49) and consumption of alcoholic beverages (PR 1.19; 95% CI: 1.04-1.35) were positively associated with tooth wear. CONCLUSION: Almost 2/3 of the surveyed individuals presented tooth wear in dentin. Being a male, higher consumption of alcohol and acidic beverages were factors associated with tooth wear. CLINICAL SIGNIFICANCE: There was a high prevalence of tooth wear in dentin in the adult population. Data has also shown the etiological complexity of tooth wear, reinforcing the importance of an early diagnosis and the establishment of preventive measures to decrease the potentially hazardous effect of tooth wear over time.

Wear behaviour of direct composite restorations in tooth wear patients: a 5-year clinical study.

OBJECTIVE: This study aimed to investigate the wear behaviour of direct composite restorations after 5 years and associated patient factors. METHODS: 38 patients (6 females, 32 males; 35.2 ± 7.6y) from the Radboud Tooth Wear Project with generalized moderate to severe tooth wear were treated with direct composite restorations on all teeth. Ethical approval was sought and granted before the study was undertaken. Intraoral 3D scans were recorded at 1 month (baseline) and 5 years (recall) after treatment. The amount of height loss was measured at six index teeth (first molars and upper central incisors). Patient factors (age, vertical dimension of occlusion increase, bite force, aetiology score, jaw position and bearing/ non-bearing cusps) were included in the analysis. Multilevel multiple regression with bootstrapping was used to analyse the influence of these factors on wear behaviour of restorations. Observer reliability was tested by paired t-tests and Band-Altman plots (p<0.05) RESULTS: After 5 years, the mean height loss was 0.23± 0.19 mm for incisors and 0.43± 0.24 mm for molars (p≤0.001). Patient factors did not show any significant influence on height loss of the composite restorations, while bearing cusps showed significant more wear compared to non-bearing cusps (p≤0.001). The observer reliability tests confirmed the repeatability (correlation of 0.809, DME 0.103). CONCLUSIONS: Wear of composite restorations is a significant and relevant factor over time in patients treated with severe tooth wear. Within the limitations of this clinical study, patient factors were found not to have a significant effect on wear behaviour of direct composite restorations.

Spin and reporting in systematic reviews with meta-analysis of randomized clinical trials in restorative dentistry.

OBJECTIVE: To estimate the prevalence of spin and completeness of reporting of systematic reviews with metanalysis (SRMAs) in restorative dentistry. METHODS: Inclusion criteria were SRMAs of randomized clinical trials of restorative dentistry on survival, success, or failure rates of treatment in humans, with no language or year restriction. SRMAs performed with non-RCTs were excluded. PubMed/MEDLINE, Web of Science, Scopus, Embase, and Cochrane Collaboration Library were searched from inception to April 2022. Outcomes were the prevalence of spin (primary outcome) and completeness of reporting (secondary outcome) in the abstract and full text. Data were reported through means and standard deviations or absolute and relative frequencies. Spin in each item was considered low when occurring in less than 25% of the papers, moderate (25 to 75%), or high (more than 75%). RESULTS: We identified 7029 studies and 49 unique manuscripts were included. There was a moderate presence of spin in the abstracts and low in full texts. In the abstracts, 65.9% did not report adverse events; while in the abstract and full text, more than 16% reported a conclusion containing recommendations for clinical practice not supported by the findings. Regarding completeness of reporting, there was poor reporting for most items in the abstract while there was an adequate report in full texts, except for register name and registration number (not reported in 32.7%). CONCLUSIONS: Abstract of SRMAs in restorative dentistry should be better reported. Spin and poor reporting were more frequent in the abstracts, which misleads readers and could lead to inadequate clinical recommendations. CLINICAL SIGNIFICANCE: Spin and incomplete reporting are a threat to evidence-based practice, especially in systematic reviews. Therefore, care providers, researchers, and other stakeholders should be aware of the possibility of spin in systematic reviews and other sources to prevent misinterpretation, which could lead to inadequate decisions and treatments.

Postoperative pain after endodontic reintervention: a randomized clinical trial

Resumo O objetivo deste ensaio clínico randomizado foi comparar a prevalência e a intensidade da dor pós-operatória em casos de retratamento endodôntico, utilizando instrumentos manuais ou reciprocantes (automatizados). O tempo necessário para desobturação e reinstrumentação do canal radicular também foi avaliado. Quarenta e oito indivíduos possuindo um dente unirradicular tratado endodonticamente e portador de periodontite apical assintomática foram incluídos no estudo. Os pacientes foram aleatoriamente distribuídos em dois grupos (n=24/grupo): retratamento com instrumentos manuais de aço inoxidável ou um sistema reciprocante de níquel-titânio (Reciproc; VDW, Munique, Alemanha). A reintervenção endodôntica foi realizada em duas consultas, sendo aplicada medicação intracanal à base de hidróxido de cálcio por 14 dias, antes da obturação. O tempo clínico gasto com os protocolos de desobturação e reinstrumentação do canal radicular foi registrado com um cronômetro digital. Após cada visita, a intensidade da dor pós-operatória foi avaliada em 12, 24, 48 horas e 7 dias por meio da escala de estimativa numérica (Numerical Rating Scale - NRS). Além do registro da dor, os pacientes foram questionados quanto ao uso de analgésicos. Os dados obtidos foram analisados por testes Qui-quadrado e Mann-Whitney (α=0.05). Não foi detectada diferença significativa entre os grupos quanto à prevalência e intensidade da dor ou uso de analgésicos em nenhum dos períodos avaliados. O tempo clínico foi significativamente menor no grupo reciprocante (18 versus 41 minutos). Pode-se concluir que os instrumentos manuais e reciprocantes foram equivalentes quanto à prevalência e intensidade de dor pós-operatória e uso de analgésicos, mas a desobturação e reinstrumentação do canal radicular foram duas vezes mais rápidas com o sistema reciprocante.

Abstract The present randomized clinical trial compared the prevalence and intensity of postoperative pain in cases of endodontic reintervention using manual or engine-driven reciprocating instruments. As secondary objectives, the analgesic intake and time required for the root canal filling removal and re-instrumentation were also evaluated. Forty-eight individuals with an endodontically treated single-rooted tooth diagnosed with asymptomatic apical periodontitis were included in the study. Patients were randomly assigned to two comparison groups (n=24/group): reintervention with stainless steel manual instruments or a nickel-titanium reciprocating system (Reciproc; VDW, Munich, Germany). The endodontic reintervention was performed in two sessions with a calcium hydroxide-based intracanal medication applied for 14 days before root canal obturation. Working time for the root canal filling removal and re-instrumentation was recorded with a digital stopwatch. After each visit, postoperative pain intensity was assessed at 12, 24, and 48 hours and seven days using the Numerical Rating Scale (NRS). The patients were also asked about analgesic intake. Data were analyzed using Pearson chi-square, T and Mann-Whitney U tests (α=0.05). No significant differences between groups were found regarding the prevalence and intensity of pain or the need for analgesic intake at any time point (P > 0.05). Working time was significantly shorter in the reciprocating group (18 versus 41 minutes). In conclusion, manual and reciprocating instruments achieved the same results in terms of prevalence and intensity of postoperative pain and analgesic intake. However, filling material removal and re-instrumentation of the root canals were more than twice as fast when using the reciprocating system.

Postoperative pain after endodontic reintervention: a randomized clinical trial.

The present randomized clinical trial compared the prevalence and intensity of postoperative pain in cases of endodontic reintervention using manual or engine-driven reciprocating instruments. As secondary objectives, the analgesic intake and time required for the root canal filling removal and re-instrumentation were also evaluated. Forty-eight individuals with an endodontically treated single-rooted tooth diagnosed with asymptomatic apical periodontitis were included in the study. Patients were randomly assigned to two comparison groups (n=24/group): reintervention with stainless steel manual instruments or a nickel-titanium reciprocating system (Reciproc; VDW, Munich, Germany). The endodontic reintervention was performed in two sessions with a calcium hydroxide-based intracanal medication applied for 14 days before root canal obturation. Working time for the root canal filling removal and re-instrumentation was recorded with a digital stopwatch. After each visit, postoperative pain intensity was assessed at 12, 24, and 48 hours and seven days using the Numerical Rating Scale (NRS). The patients were also asked about analgesic intake. Data were analyzed using Pearson chi-square, T and Mann-Whitney U tests (α=0.05). No significant differences between groups were found regarding the prevalence and intensity of pain or the need for analgesic intake at any time point (P > 0.05). Working time was significantly shorter in the reciprocating group (18 versus 41 minutes). In conclusion, manual and reciprocating instruments achieved the same results in terms of prevalence and intensity of postoperative pain and analgesic intake. However, filling material removal and re-instrumentation of the root canals were more than twice as fast when using the reciprocating system.

O objetivo deste ensaio clínico randomizado foi comparar a prevalência e a intensidade da dor pós-operatória em casos de retratamento endodôntico, utilizando instrumentos manuais ou reciprocantes (automatizados). O tempo necessário para desobturação e reinstrumentação do canal radicular também foi avaliado. Quarenta e oito indivíduos possuindo um dente unirradicular tratado endodonticamente e portador de periodontite apical assintomática foram incluídos no estudo. Os pacientes foram aleatoriamente distribuídos em dois grupos (n=24/grupo): retratamento com instrumentos manuais de aço inoxidável ou um sistema reciprocante de níquel-titânio (Reciproc; VDW, Munique, Alemanha). A reintervenção endodôntica foi realizada em duas consultas, sendo aplicada medicação intracanal à base de hidróxido de cálcio por 14 dias, antes da obturação. O tempo clínico gasto com os protocolos de desobturação e reinstrumentação do canal radicular foi registrado com um cronômetro digital. Após cada visita, a intensidade da dor pós-operatória foi avaliada em 12, 24, 48 horas e 7 dias por meio da escala de estimativa numérica (Numerical Rating Scale - NRS). Além do registro da dor, os pacientes foram questionados quanto ao uso de analgésicos. Os dados obtidos foram analisados por testes Qui-quadrado e Mann-Whitney (α=0.05). Não foi detectada diferença significativa entre os grupos quanto à prevalência e intensidade da dor ou uso de analgésicos em nenhum dos períodos avaliados. O tempo clínico foi significativamente menor no grupo reciprocante (18 versus 41 minutos). Pode-se concluir que os instrumentos manuais e reciprocantes foram equivalentes quanto à prevalência e intensidade de dor pós-operatória e uso de analgésicos, mas a desobturação e reinstrumentação do canal radicular foram duas vezes mais rápidas com o sistema reciprocante.

Systematic reviews on the success of dental implants present low spin of information but may be better reported and interpreted: An overview of systematic reviews with meta-analysis.

OBJECTIVE: To estimate the prevalence of spin and completeness of reporting of systematic reviews with metanalysis (SRMAs) in implant dentistry. STUDY DESIGN AND SETTING: Inclusion criteria were SRMAs of randomized clinical trials of implant dentistry on survival, success, or failure rates in humans, with no language restriction. Three databases were searched from inception to May 2021. Main outcomes were prevalence of spin (primary outcome) and completeness of reporting (secondary outcome) in abstracts and full texts. RESULTS: We identified 2481 SRMAs and 45 unique manuscripts were included. There was a low presence of spin in the abstracts and full text, except for adverse events, in which 51.1% (in the abstract) failed to mention any adverse event for summarized interventions. There was an adequate report of SRMAs in the full text except for prospective register (33.3% not reported). However, there was an incomplete report for most items in the abstract considering PRISMA-A checklist. CONCLUSION: In general, the included SRMAs presented a (a) low prevalence of spin (except for adverse events in the abstract); (b) adequate completeness of reporting in the full text (except for prospective register); and (c) incomplete report for most items in the abstracts.

Comparison of material properties and biofilm formation in interim single crowns obtained by 3D printing and conventional methods.

STATEMENT OF PROBLEM: Three-dimensionally printed interim restorations are among the recent technological advancements in dentistry. However, evidence of their performance is lacking. PURPOSE: The purpose of this in vitro study was to compare the properties of interim restorations made by 3D printing with different technologies, laser stereolithography (SLA), technology and selective laser sintering (SLS) with those obtained by conventional techniques from acrylic resin and bis-acryl resin. MATERIAL AND METHODS: Four different groups (acrylic resin, bis-acryl resin, SLS, SLA) were tested for flexural strength, Vickers microhardness, fatigue test, compressive strength, surface roughness before and after polishing, and biofilm formation. Specimens were made in the form of rectangular blocks, disks, and single crowns by following the manufacturing technique of each material. One-way ANOVA was used to test biofilm formation, Vickers microhardness, and the results of the 3-point bend flexural test, while the paired t test was used to assess differences in surface roughness between the materials (α=.05 for all tests). RESULTS: The highest Vickers microhardness value was for acrylic resin interim crowns, while the elastic moduli were lower for both the 3D printed materials. Only the SLA resin fractured during the fatigue test. For surface roughness, a statistically significant difference was found among the studied materials (P<.001), with SLA resin and bis-acryl resin having the lowest values. No statistically significant differences were found for biofilm formation (P>.05). CONCLUSIONS: SLS resin had favorable results for the Vickers microhardness, higher maximum flexural strength, and peak stress in load-to-fracture tests, the fatigue test, and biofilm formation compared with acrylic resin and bis-acryl resin, while SLA resin showed favorable results only for biofilm formation and surface roughness.

Influence of post type on periapical status: a prospective study in a Brazilian population.

OBJECTIVES: This prospective study assessed the effect of post type used to restore endodontically treated teeth in the onset, progression, and remission of periapical lesions. MATERIALS AND METHODS: One hundred and forty teeth (92 patients) were endodontically treated and received a glass fiber post or a cast metal post and a final restoration at a University Clinic by undergraduate students. All patients were followed up for a mean period of 5.1 ± 2.2 years. Periapical Index (PAI) was used for endodontic assessment. Two calibrated and blind examiners assessed the radiographs. The longevity of the endodontic treatment was analyzed using Kaplan-Meier statistics. RESULTS: Of the included teeth, 67.1% received glass fiber posts while 32.9% received cast metal posts. There were 4 endodontic failures, two glass fiber posts with a PAI = 3 in the baseline and PAI = 4 in the last follow-up, and one PAI = 4 in baseline and last follow-up. One cast metal post-failure was PAI = 4 in the baseline and the last follow-up. After 9.4 years, the overall success rate of the endodontic treatment was 97.1% (p = 0.7). CONCLUSIONS: The tested posts presented similar endodontic healing. Precautions taken during endodontic therapy, post cementation, and final restoration are more likely to be responsible for the success of endodontic treatment rather than a specific type of post. Clinical relevance The type of post is not related to the success of the endodontic treatment.